Auto Electrical
Car speaker installation near you
Car speaker installation: factory speakers swapped for better ones, with amplifiers or subwoofers wired in and the original wiring left uncut.
- Time at the shop
- 2 h
- about
- Mobile service
- Available
- at your address
- Shops in Canada
- 1
- doing this work
- Your price
- You set it
- shops bid on it
You set the budget
Shops near you send their bids
1 shop in Canada does this
Auto Electrical
What a car speaker installation is
Car speaker installation swaps the basic paper-cone speakers most vehicles leave the factory with, in the doors, dash or rear deck, for aftermarket ones, and can add an amplifier or subwoofer when the stereo alone is not powerful enough. The installer takes off the door panels, fits adapter brackets and plug-in harnesses so the original wiring stays uncut, checks that each speaker is wired in phase and refits the trim.
Most drivers book it because a speaker has blown and now buzzes or crackles, or because the stock sound turns thin and harsh at highway volume. A pair of door speakers takes about an hour and four speakers around two. An amplifier and subwoofer add two to four hours, since a fused power cable has to run from the battery through the firewall to wherever the amplifier is mounted.
- For cars, EVs, vans and trucks
- Takes about 2 h
- Can be done at your address
What does a car speaker installation cost?
It depends on your vehicle and the shop. Post a job with your budget and compare the bids shops near you send.
Get bids
Name your budget. Shops near you bid.
1 shop across Canada does car speaker installation.
What to expect
Car speaker installation, step by step
What the job normally covers, what to mention in your request, and the signs that it is time. Every shop says what its bid includes.
The job
What’s included
- Speaker size, mounting depth and impedance checked against your vehicle before any trim comes off
- Door panels, grilles or rear deck trim removed and refitted without broken clips
- Adapter brackets and plug-in harnesses fitted, so the factory connectors are not cut off
- New speakers mounted, sealed against the door and wired in the correct polarity
- Component set: tweeters and crossovers positioned and secured, plus sound-deadening mat on the door where included
- For an amplifier: fused power cable from the battery, chassis ground, signal and turn-on leads
- Amplifier gains and crossover points set, then a listening test for rattles and distortion
- Windows, locks and mirror switches tested once the door panels are back on
Checklist
Before you post
- 01Confirm the sizes and depths your vehicle takes; a speaker that is too deep can foul the window glass as it lowers
- 02Ask whether the price is labour only or includes brackets, harness adapters and, for an amplifier, the wiring kit
- 03Say if the vehicle has a factory amplifier or premium sound package; it may need an interface or different speakers
- 04Ask whether your stereo has enough power for the speakers you picked or whether they really need an amplifier
- 05Bringing your own speakers? Check the shop fits customer-supplied parts and what its labour warranty then covers
- 06On a lease, ask for a fully reversible install and keep the original speakers to put back
Signs
When you need it
- A speaker buzzes, crackles or rattles on bass notes
- One door has gone quiet or cuts in and out over bumps
- Music turns thin and harsh once you turn it up on the highway
- You fitted a new stereo and the original speakers cannot keep up with it
- You want real bass and the vehicle has no subwoofer
Sound familiar?Tell shops near you what you need and what you want to spend.
Get bidsHow it works
Get a car speaker installation done in four steps
You set the budget and choose the shop. Posting is free, and you pay the shop you hire once the work is 100% done.
- 01
Post your job
Choose the service, describe the job and your vehicle, and set your budget. It takes two minutes and costs nothing.
- 02
Shops compete
Nearby shops that do the work see your request and send their best offer: price, when they can start, what is included.
- 03
Accept the best offer
Compare bids, ratings and distance, then hire one shop. The others are told, politely.
- 04
Talk and get it done
Your conversation with the shop opens right away to agree on the day. You pay only after the job is complete.
Keep exploring
Related services
Car stereo installation
Car stereo installation with the right dash kit and harness, keeping steering wheel controls and adding Bluetooth, Apple CarPlay or Android Auto.
Battery replacement & testing
Car battery replacement with the battery and charging system tested first, a matching battery fitted, registered if needed and the old one recycled.
Auto electrical repair
Auto electrical repair for blown fuses, dead circuits, warning lights and overnight battery drain, with the faulty wire, relay or connection traced and fixed.
Dash cam installation
Dash cam installation behind the mirror, hardwired to the fuse box with cables hidden in the trim and parking mode set to protect your battery.
Questions
Questions about car speaker installation
General answers for drivers in Canada. The shop you hire confirms the details for your vehicle.
Do I need an amplifier for new car speakers?
Not always. Efficient speakers, with a sensitivity of about 90 dB or higher, will sound clearer and play louder before distorting on a factory stereo’s power alone. What they will not deliver without help is deep bass or very high volume; that takes an amplifier, a subwoofer or both. Tell the installer what stereo you have so the speakers are matched to it.
Can I replace just one blown car speaker?
You can, but speakers are sold in pairs and the left and right doors will only sound alike if both are changed. Have the installer confirm the speaker is actually blown before buying anything: a crackle or a dead channel can also come from a loose connector behind the door panel, a broken wire in the door hinge or a failing amplifier channel.
Will an amplifier or subwoofer drain my battery?
Not when it is wired properly. The amplifier’s turn-on lead switches it off with the stereo, so it draws almost nothing while the vehicle is parked. A very large system can pull more current than the alternator supplies at idle, which shows up as headlights dimming on bass hits. The installer can tell you whether your battery and charging system are up to the amplifier you have in mind.
Can I bring my own speakers to be installed?
Most shops will fit speakers you bought elsewhere, though the warranty then covers their labour only and not the parts. Check the fit before you buy: door speakers come in several diameters and depths, and the wrong size means spacers, cutting or a second trip. Bring the boxes, since the mounting hardware and grilles inside are sometimes needed.
How long does car speaker installation take?
About an hour for a pair in doors that come apart easily and around two hours for four speakers. Rear deck speakers in a sedan and tweeters in the windshield pillars add time because more trim has to come off. An amplifier and subwoofer take a further two to four hours, so plan on leaving the vehicle for half a day for a full system.
Something else to ask? Once you hire a shop, you talk to it directly in your request’s conversation.
Ready when you areTell shops near you what you need and what you want to spend.
Get bidsFor auto electrical shops
Sign up as a business
Auto electrical shops across Canada: drivers post their Auto Electrical requests here. Publish your weekly flyer, open the appointment windows you can take and bid on the jobs near you. Free while we launch, no commission.