Auto Electrical
Headlight & bulb replacement near you
Burnt-out headlight, brake light, turn signal and taillight bulbs replaced with the correct type, then every lamp tested and the beam pattern checked.
- Time at the shop
- 30 min
- about
- Mobile service
- Available
- at your address
- Shops in Canada
- 3
- doing this work
- Your price
- You set it
- shops bid on it
You set the budget
Shops near you send their bids
3 shops in Canada do this
Auto Electrical
What headlight & bulb replacement is
Headlight and bulb replacement covers every lamp on the outside of the vehicle: low and high beams, fog and daytime running lights, brake lights, taillights, turn signals, backup lights and the licence plate lamp. Halogen bulbs are the simplest to change. HID (xenon) bulbs cost more and run from a high-voltage ballast, and many factory LED headlights are sealed units, so the whole assembly is replaced when one fails.
The technician finds which lamp has failed, fits the correct bulb for your vehicle, checks the socket and fuse in case something else caused it, then tests every function. Headlight bulbs should be changed in pairs, since the second is the same age and often follows within weeks. Where the bumper or battery must move to reach a bulb, labour rises, and the beam pattern is checked afterward.
- For cars, EVs, vans and trucks
- Takes about 30 min
- Can be done at your address
What does headlight & bulb replacement cost?
It depends on your vehicle and the shop. Post a job with your budget and compare the bids shops near you send.
Get bids
Name your budget. Shops near you bid.
3 shops across Canada do headlight & bulb replacement.
What to expect
Headlight & bulb replacement, step by step
What the job normally covers, what to mention in your request, and the signs that it is time. Every shop says what its bid includes.
The job
What’s included
- Every exterior lamp switched on and checked: beams, brake, turn, backup, fog and licence plate lights
- Correct bulb type identified from your vehicle’s details, not guessed from the shape of the old one
- Failed bulb removed and its socket, connector and wiring checked for heat damage or corrosion
- New bulbs handled by the base only, since skin oil on halogen glass creates hot spots that shorten its life
- Headlight bulbs replaced in a matched pair where you approve it, for even colour and brightness
- Fuse, relay or ground checked when a bulb has died twice or several lamps fail together
- Headlight housing checked for moisture, cracks and heavy haze; dust cap or seal refitted so moisture stays out
- Beam pattern checked against a wall, and aim adjustment offered where the beams are off
Checklist
Before you post
- 01Say which lamp is out and whether the headlights are halogen, HID or LED; the part and the price depend on it
- 02Ask whether your vehicle needs both headlight bulbs changed, and what the second one adds
- 03Ask if the bumper cover, air intake or battery must come out to reach the bulb; on many vehicles that adds labour
- 04Want brighter light? Ask for a bulb rated for your headlight housing rather than a plug-in LED conversion
- 05If the housing fogs up inside, ask for it to be inspected; a new bulb will not fix a leak
- 06Ask whether headlight aiming is included, especially after suspension, bumper or headlight assembly work
Signs
When you need it
- A headlight, brake light or turn signal is out, or the turn signal blinks twice as fast as usual
- Headlights look dim, yellow or uneven compared with a few years ago
- The dash shows a bulb-out warning message
- Beams point too high, too low or off to one side
- Preparing a used vehicle for a Safety Standards Certificate, which checks headlights, brake lights and turn signals
Sound familiar?Tell shops near you what you need and what you want to spend.
Get bidsHow it works
Get headlight & bulb replacement done in four steps
You set the budget and choose the shop. Posting is free, and you pay the shop you hire once the work is 100% done.
- 01
Post your job
Choose the service, describe the job and your vehicle, and set your budget. It takes two minutes and costs nothing.
- 02
Shops compete
Nearby shops that do the work see your request and send their best offer: price, when they can start, what is included.
- 03
Accept the best offer
Compare bids, ratings and distance, then hire one shop. The others are told, politely.
- 04
Talk and get it done
Your conversation with the shop opens right away to agree on the day. You pay only after the job is complete.
Keep exploring
Related services
Detailing & Car Wash
Headlight restoration
Headlight restoration that wet-sands, polishes and UV-seals yellowed, cloudy lenses, so the beam is clear again at night, in about an hour.
LED lighting installation
LED lighting installation for interior ambient strips, cargo and bed lights, rock lights and underglow, wired to fused, switched circuits.
Inspections
Safety inspection (Safety Standards Certificate)
Safety inspection at a licensed provincial station: brakes, steering, tires, lights and body checked, then a safety certificate issued on a pass.
Auto electrical repair
Auto electrical repair for blown fuses, dead circuits, warning lights and overnight battery drain, with the faulty wire, relay or connection traced and fixed.
Mechanical Repair
Wiper blade replacement
Wiper blade replacement for front and rear glass, matched to your vehicle and fitted in minutes, with winter blades that keep clearing ice and slush.
Questions
Questions about headlight & bulb replacement
General answers for drivers in Canada. The shop you hire confirms the details for your vehicle.
Should I replace both headlight bulbs at the same time?
Usually, yes. Both bulbs have run the same hours, so when one fails the other is close behind, and a matched pair lights the road evenly, with the same colour and brightness on each side. The saving is labour, especially where reaching the bulb takes effort. On an easy vehicle, both take about twenty to thirty minutes.
Can I change a headlight bulb myself?
On many vehicles you can: reach behind the headlight, twist out the old bulb and fit a new one of the same type. Do not touch halogen glass, since skin oil makes hot spots that shorten its life. HID bulbs run on very high voltage and should be handled with the battery disconnected. Some vehicles need the bumper or battery moved first, and sealed LED units cannot be serviced at all.
Are LED bulbs a good upgrade for my halogen headlights?
Not as a simple bulb swap. A halogen housing is designed around the position of a filament, so an LED bulb in it often scatters light, leaving dark patches ahead and glare for oncoming drivers. Better options are bulbs made for your housing or an LED headlight assembly designed for your vehicle. Have the aim checked after any change, and treat the brightness claims on the box with caution.
Why is my turn signal blinking fast?
A signal that flashes about twice as fast as normal usually means a bulb on that side has burnt out, front or rear, because the flasher reacts to the lower current. Replacing the bulb restores the normal rate. LED bulbs draw less current and can cause the same fast flash, which is cured with load resistors or a matching flasher relay.
Why did my new headlight bulb burn out so soon?
Usual causes are skin oil on the glass, moisture inside a leaking housing, a loose or corroded socket, an alternator that overcharges and sends surges through the electrical system, or a cheap bulb. When a replacement fails within weeks, the technician checks the socket, the connector and the charging voltage instead of fitting a third bulb.
Something else to ask? Once you hire a shop, you talk to it directly in your request’s conversation.
Ready when you areTell shops near you what you need and what you want to spend.
Get bidsFor auto electrical shops
Sign up as a business
Auto electrical shops across Canada: drivers post their Auto Electrical requests here. Publish your weekly flyer, open the appointment windows you can take and bid on the jobs near you. Free while we launch, no commission.