Mechanical Repair
Wiper motor repair near you
Wiper motor repair for wipers that are dead, slow, stuck mid-sweep or out of step: motor, linkage, switch, relay and washer pump faults fixed.
- Time at the shop
- 1 h 30 min
- about
- Mobile service
- Available
- at your address
- Shops in Canada
- Joining soon
- doing this work
- Your price
- You set it
- shops bid on it
You set the budget
Shops near you send their bids
Free to post, no obligation
Mechanical Repair
What wiper motor repair is
Under the plastic cowl at the base of the windshield, an electric motor drives a linkage of rods and pivots that sweeps both wiper arms. The stalk switch, a relay or control module and a fuse feed the motor, and a park switch inside it brings the blades back to rest. A fault in any of these leaves you with wipers that are dead, slow, stuck partway up or moving out of step.
The repair starts with testing, because a blown fuse and a burnt-out motor look identical from the driver’s seat. Once the failed part is found, the arms and cowl come off, the motor or linkage is replaced, the pivots are greased and the arms are set to park where they should. Washer faults, such as a dead pump or blocked nozzles, are dealt with in the same visit.
- For cars, EVs, vans and trucks
- Takes about 1 h 30 min
- Can be done at your address
What does wiper motor repair cost?
It depends on your vehicle and the shop. Post a job with your budget and compare the bids shops near you send.
Get bids
Name your budget. Shops near you bid.
Shops across Canada that do wiper motor repair see your request.
What to expect
Wiper motor repair, step by step
What the job normally covers, what to mention in your request, and the signs that it is time. Every shop says what its bid includes.
The job
What’s included
- Fuse, relay and stalk switch tested, with power and ground checked at the motor plug
- Wiper arms and cowl panel removed to reach the motor and linkage
- Linkage inspected for popped ball joints, worn bushings and seized pivots
- Motor, linkage or the complete assembly replaced as diagnosed
- Pivots cleaned and greased, and cowl drains cleared of leaves
- Arms refitted and park position set so the blades rest at the base of the glass
- Every speed, the intermittent setting and the washer spray tested
Checklist
Before you post
- 01Describe what the wipers do: dead, slow, one arm only or stopping mid-windshield; it narrows the fault
- 02Confirm whether the estimate covers the motor, the linkage, or both supplied as one assembly
- 03Ask for the fuse and relay to be checked first, especially if the wipers quit while frozen to the glass
- 04Mention a rear wiper or washers that also fail, so everything is priced in one visit
- 05Ask how testing time is charged if the fault turns out to be only a fuse
Signs
When you need it
- Wipers do nothing on any setting, or work on one speed only
- Blades stop partway up the windshield and will not park
- One arm moves while the other stays still, or the arms collide
- Wipers crawl across the glass even in heavy rain
- Washer pump hums with no spray, or makes no sound at all
Sound familiar?Tell shops near you what you need and what you want to spend.
Get bidsHow it works
Get wiper motor repair done in four steps
You set the budget and choose the shop. Posting is free, and you pay the shop you hire once the work is 100% done.
- 01
Post your job
Choose the service, describe the job and your vehicle, and set your budget. It takes two minutes and costs nothing.
- 02
Shops compete
Nearby shops that do the work see your request and send their best offer: price, when they can start, what is included.
- 03
Accept the best offer
Compare bids, ratings and distance, then hire one shop. The others are told, politely.
- 04
Talk and get it done
Your conversation with the shop opens right away to agree on the day. You pay only after the job is complete.
Keep exploring
Related services
Wiper blade replacement
Wiper blade replacement for front and rear glass, matched to your vehicle and fitted in minutes, with winter blades that keep clearing ice and slush.
Auto Electrical
Auto electrical repair
Auto electrical repair for blown fuses, dead circuits, warning lights and overnight battery drain, with the faulty wire, relay or connection traced and fixed.
Collision & Body Work
Windshield repair & replacement
Windshield repair and replacement: stone chips and short cracks filled with resin, or a new windshield fitted, with camera calibration where needed.
Inspections
Safety inspection (Safety Standards Certificate)
Safety inspection at a licensed provincial station: brakes, steering, tires, lights and body checked, then a safety certificate issued on a pass.
Questions
Questions about wiper motor repair
General answers for drivers in Canada. The shop you hire confirms the details for your vehicle.
Why did my windshield wipers suddenly stop working?
Most often it is a blown fuse, a failed motor, or a linkage that has popped off its ball joint. In winter the trigger is frequently switching the wipers on while the blades are frozen to the glass or buried under heavy snow: the motor stalls and the fuse blows to protect it. If you can hear the motor running but nothing moves, the linkage or the arm splines have let go.
Can I drive if my wipers are not working?
Not safely in rain, snow or slush, because spray from other vehicles on a wet highway can blind you within seconds. Wipers and the washer are also checked in a provincial safety inspection, and a vehicle that cannot clear its windshield can fail. If the forecast is dry you can drive carefully to a shop; otherwise have the repair done where the vehicle sits, or arrange a tow.
How do I tell if it is the wiper motor or the linkage?
Switch the wipers on and listen at the base of the windshield. A motor that hums or whirs while the arms stay still points to a disconnected linkage, stripped arm splines or a stripped gear inside the motor. Silence points to the fuse, relay, switch, wiring or the motor itself. Arms that move unevenly or clash with each other usually mean a worn linkage bushing or a seized pivot.
Why is my windshield washer fluid not spraying?
Usually it is an empty or frozen reservoir, a blocked nozzle or a failed pump. Check the fluid level first, then listen for the pump when you pull the stalk. No sound suggests a fuse or a dead pump; a pump that hums without spraying points to a blocked nozzle, a split or disconnected hose, or frozen fluid. Summer fluid or plain water freezes solid and can crack the reservoir and the pump, so run fluid rated for -40 °C through the winter.
How long does a wiper motor replacement take?
About an hour to an hour and a half on most vehicles once the part is on hand. Some designs bury the motor deep under the cowl, and wiper arms corroded onto their shafts need a puller and some patience. A special-order motor or linkage can mean a second visit.
Something else to ask? Once you hire a shop, you talk to it directly in your request’s conversation.
Ready when you areTell shops near you what you need and what you want to spend.
Get bidsFor mechanical repair shops
Sign up as a business
Mechanical repair shops across Canada: drivers post their Mechanical Repair requests here. Publish your weekly flyer, open the appointment windows you can take and bid on the jobs near you. Free while we launch, no commission.